Complete electrical capabilities
Electrical work for homes, businesses, facilities and large sites.
Elite Electrical Specialties is a California C-10 electrical contractor. Browse the categories below for the residential, commercial, industrial, agricultural, energy and site-electrical work our team can evaluate and perform.
01Residential construction, additions and remodeling
Complete electrical systems and alterations for new and existing homes.
- New-home and custom-home electrical systems
- Home additions, ADUs and garage conversions
- Kitchen, bathroom, bedroom and living-area remodel wiring
- Whole-home and partial rewiring
- Obsolete or damaged branch-circuit replacement
- New circuits, circuit extensions, receptacles, switches and boxes
- 120V and 240V residential circuits
- Hardwired smoke and carbon-monoxide alarms in ordinary dwelling systems
02Troubleshooting and electrical repair
Diagnosis begins with the actual symptoms rather than guessing which part should be replaced.
- Partial and complete power outages
- Intermittent circuits, nuisance trips and flickering lights
- Open neutrals, open hots and voltage-drop problems
- Short circuits, ground faults and arc-fault problems
- Burned receptacles, loose connections and damaged wiring
- Lost phases and three-phase troubleshooting
- Circuit tracing, continuity, voltage and current testing
- Underground conductor, motor, control and transfer-switch troubleshooting
03Services, meters, panels and distribution
Service and distribution work is planned around load, equipment condition, utility requirements and future needs.
- New electrical services and service upgrades
- 100A, 125A, 150A, 200A, 225A and 320/400A residential services
- Commercial service upgrades and service disconnects
- Meter sockets, meter-mains and combination service equipment
- Main panels, subpanels, panelboards, switchboards and feeders
- 120/208V, 120/240V and 277/480V distribution
- Grounding, bonding, Ufer grounds, ground rods and intersystem bonding
- Load calculations, panel labeling, circuit directories and phase balancing
- Temporary services and construction power
04Breakers, disconnects, surge and power protection
Protection devices are selected to match the conductors, equipment and system configuration.
- Standard, two-pole and three-pole breaker replacement
- GFCI, AFCI and dual-function protection
- Main breakers and shunt-trip breakers
- Fused and non-fused safety switches
- Service-rated and emergency disconnects
- Whole-home and commercial surge protection
- Motor circuit and equipment protection
- Voltage monitoring, phase monitoring and load management
05Receptacles, switches and control devices
New devices, replacement devices and specialty outlets for residential, commercial and industrial use.
- Standard, tamper-resistant, commercial and specification-grade receptacles
- GFCI, weather-resistant, USB and USB-C receptacles
- Floor, countertop, pop-up and exterior receptacles
- 20A, 30A and 50A outlets
- Range, dryer, welder, RV, generator and EV receptacles
- Twist-lock, pin-and-sleeve and isolated-ground devices
- Three-way, four-way, dimmer, timer and smart switches
- Occupancy, vacancy, daylight and photocell controls
06Interior, exterior and site lighting
Lighting installation, retrofit, repair and controls for homes, buildings, warehouses and outdoor sites.
- Recessed, canless, track, pendant, chandelier and general lighting
- Under-cabinet, cove, accent, stair, closet and vanity lighting
- Garage, shop, high-bay, low-bay, warehouse and linear lighting
- Parking-lot, pole, area, flood, wall-pack and security lighting
- Landscape, canopy, dock, crane and building-mounted lighting
- LED retrofits and fluorescent-to-LED conversions
- Lighting contactors, relays, control panels, dimming and time-clock controls
- Title 24 lighting-control work
- Exit signs, emergency lighting and battery backup units
07Appliance, HVAC and specialty equipment circuits
Dedicated power and disconnecting means for fixed appliances and owner- or trade-furnished equipment.
- Ranges, ovens, cooktops, microwaves and dishwashers
- Washers, dryers, refrigerators and freezers
- Electric and heat-pump water heaters, including tankless equipment
- Furnaces, air handlers, condensers, mini-splits and heat pumps
- Commercial kitchen and cooking equipment
- Walk-in coolers and refrigeration equipment power
- Ceiling fans, exhaust fans and ventilation-equipment power
- Dedicated equipment circuits and disconnects
08EV charging and RV electrical
Charging infrastructure is designed around service capacity, load calculation, equipment rating and conductor route.
- Level 1 and Level 2 charging circuits
- Hardwired EVSE and NEMA 14-50 outlets
- Residential, commercial, fleet and multi-unit charging
- EV panels, disconnects, pedestals and accessible charging infrastructure
- Load-management and automatic load-shedding systems
- Underground parking-lot EV infrastructure
- Transformer and distribution upgrades for EV systems
- 30A and 50A RV circuits, pedestals and RV-park distribution
09Solar, battery storage and energy management
Electrical installation, integration, replacement and troubleshooting for solar and battery systems.
- Residential, commercial, roof-mounted and ground-mounted PV
- PV modules, string wiring, combiners and DC conductors
- AC and DC disconnects, inverters, microinverters and optimizers
- Rapid shutdown, monitoring and solar feeder connections
- Solar rewiring, expansions and inverter replacement
- Whole-home, partial-home and critical-load battery backup
- AC-coupled and DC-coupled batteries and hybrid inverters
- Solar, battery and generator integration
- Energy monitoring, demand management and load shedding
10Generators, transfer equipment and critical power
Portable and standby power systems for homes, businesses and facilities.
- Portable-generator inlets and listed interlock systems
- Manual and automatic transfer switches
- Standby-generator electrical connections and feeders
- Generator controls, annunciators, battery chargers and distribution panels
- Generator bypass equipment, docking stations and cam-lock connections
- Temporary generator distribution
- UPS systems, bypass switches and critical-power panels
- Computer-room, server-room and data-center power distribution
11Commercial electrical construction and service
Electrical support for occupied businesses, remodels, tenant improvements and new commercial work.
- Tenant improvements and commercial renovations
- Retail, office, restaurant, warehouse, hotel and storage-facility electrical
- Automotive, dealership, grocery and manufacturing facilities
- Commercial services, panels, switchgear and distribution
- Commercial lighting, receptacles and equipment feeds
- Commercial kitchen, signage and roof-equipment power
- Exterior site electrical and parking-lot infrastructure
- Maintenance, preventive maintenance and troubleshooting
- Plan review, estimating, phasing and shutdown coordination
12Industrial power, motors and controls
Power distribution and field wiring for production equipment, motors and industrial facilities.
- Industrial services, panels, switchboards and motor-control centers
- Motor circuits, starters, contactors, overloads and disconnects
- VFD power wiring, installation, replacement and troubleshooting
- Soft starters, machine feeds and production-equipment feeds
- Conveyors, pumps, compressors, cranes and hoists
- Control circuits, relays, timers, limit switches and sensors
- PLC field wiring, control-panel field connections and machine interlocks
- E-stop circuits, instrument power, solenoids and actuators
- 480V, phase-loss, phase-sequence and motor troubleshooting
13Agricultural and rural electrical
Electrical systems for rural properties, farms, shops and agricultural operations.
- Barns, shops, equipment sheds and agricultural buildings
- Well, booster, irrigation and other pump systems
- Agricultural motors, controls and processing-equipment power
- Outdoor panels, farm services and remote feeders
- Greenhouses and livestock-building electrical
- Agricultural lighting and refrigeration power
- Agricultural generators and remote power systems
- Long feeder routes and voltage-drop planning
14Underground, raceway, outdoor and temporary power
Complete electrical pathways and site infrastructure, with civil responsibilities stated clearly.
- Underground PVC, rigid conduit and electrical duct banks
- Underground feeders, branch circuits and conductor replacement
- Ground boxes, pull boxes, Christy boxes and handholes
- Underground splicing, tracer systems and direct-burial wiring where permitted
- Site-lighting, EV, solar, gate and communications conduit systems
- EMT, RMC, IMC, PVC, FMC, LFMC, LFNC, wireway and surface raceway
- Cable tray, trapeze, strut and conduit-support systems
- Parking-lot, pedestrian, dock, monument-sign and exterior-building electrical
- Temporary services, panels, lighting, spider boxes and equipment power
15Structured cabling, Wi-Fi and non-alarm low voltage
Communications and building-system wiring that does not require regulated alarm or security credentials.
- Cat5e, Cat6 and Cat6A cabling
- Ethernet drops, patch panels and data jacks
- Telephone, video and coaxial cabling
- Fiber raceways and fiber cabling within the appropriate project scope
- Wi-Fi access-point wiring and power
- PoE systems
- AV, speaker and building-control wiring
- Communications conduit and pathways
16Gates, doors, signs, pools and specialty power
Electrical power and field wiring for specialized owner- or vendor-furnished systems.
- Gate operator power, motor circuits and control-panel power
- Gate photo-eye, safety-edge and loop-detector field wiring where part of the electrical scope
- Roll-up door, garage-door and automatic-door circuits
- Electrical sign circuits, disconnects and power supplies
- Pool pumps, panels, lighting, transformers and bonding
- Spa, hot-tub, fountain and water-feature electrical
- Manufactured-home services, feeders, pedestals and distribution
- Specialty equipment power and disconnects
17Testing, maintenance and specialty occupancies
Electrical evaluation and project work performed with the equipment, documentation and coordination appropriate to the system.
- Insulation-resistance and Megger testing
- Voltage, amperage, continuity, load and phase-rotation testing
- GFCI, breaker, grounding and bonding evaluation
- Torque verification and preventive maintenance
- Power-quality, under/overvoltage and phase monitoring
- Healthcare, commercial kitchen, marina, RV-park and mobile-home-park electrical
- Warehouses, cold storage, data centers, hotels, schools and assembly occupancies
- Industrial, agricultural, water/wastewater and other specialty facilities
18Transformers and phase converters
Transformer and phase-conversion solutions for equipment, facilities and loads that require a different voltage or phase configuration.
- Step-up, step-down, buck-boost, isolation and dry-type transformers
- Single-phase and three-phase transformer systems
- Transformer feeders, secondary conductors, grounding and protection
- Transformer replacement and troubleshooting
- Rotary and static phase converters
- Phase-converter feeders, disconnects and overcurrent protection
- Equipment voltage and phase compatibility review
- Coordination with equipment manufacturers and engineers when required
01
02
03
04
05
06
